Many homes are starting utilizing bidet sprayers, bidet showers, or shattafs for their efficient and sanitary cleaning needs. Putting in a hand-held bidet sprayer is an easy do-it-yourself job that can make your bathroom experience better. But having a professional like https://www.plumbersingapore.org/clogged-drain-choke/ do the job will make the whole process go smooth.
Plumbersingapore.org are efficient in the work they do as they have extensive knowledge. This guide will show you how to properly and securely setup your bidet sprayer by taking you through each step.
Turn Off the Water Supply:
You need to stop the water to your toilet first. This is the most important step. The valve that turns the water off is normally on mounted behind the toilet. You can turn off the water supply by turning the valve clockwise till it stops. The water flow in the hose will drop when you flush the toilet. By taking this step, you can feel assured that no water will leak out while you cut the supply line.
Disconnect the Water Supply Hose:
Loosen the nut that connects the water supply pipe to the toilet tank using a wrench or pliers. Put a bucket or towel underneath the connection to collect any water that drips out. After you loosen the nut, you can remove the supply line from the tank.
Install the T-Valve:
A T-valve is an essential part of any toilet system because it controls the flow of water to both the tank and the bidet sprayer. A watertight seal can be achieved by taking the T-valve off the bidet sprayer kit and wrapping the threads with Teflon tape. Use a torque wrench to tighten the T-valve even more after you’ve tightened it with your hand. Then, connect it to the toilet tank’s fill valve.
Reconnect the Water Supply Hose:
Link the water supply line back to the T-valve’s base. When joining, be confident that there’s no leaks by wrapping the threads with Teflon tape. Tighten the nut by turning the wrench clockwise.
Attach the Bidet Hose to the T-Valve:
Join the bidet hose to the T-valve by connecting one end to its side outlet. Tighten the connection using the wrench after applying Teflon tape to the threads to avoid leaks. Ensure that the hose is well fastened, but be careful not to overtighten, as it could harm the threads.
Put the Sprayer Head:
Fit the sprayer head onto the opposite end of the bidet hose. Make sure there is a tight seal by wrapping Teflon tape around each thread before you screw on the spraying head. After you’ve tightened it by hand, you can utilize the wrench to strengthen it if needed.
Install the Sprayer Holder:
Depending on your personal style and the design of the kit, you have the option to put the bidet sprayer holder either on the wall or the side of toilet tank. Most holders have screws or a sticky back on them. Make sure the area where you want to attach the holder is clean, dry, and dust-free. Stick the holder to the surface firmly for a minimum of 30 seconds if you’re using glue. Draw pencil lines around the holes if you’re using screws. Then drill small holes first, and then put the holder in place.
Turn On the Water Supply:
It is time to reconnect the water supply once everything is linked and secured. Return water pressure to the bidet and toilet by gently turning the off valve counter clockwise. Ensure that every connection is free from leaks. When you see any drips, just slightly tighten the connectors until they cease.
Test the Bidet Sprayer:
Press the lever or trigger to test the bidet sprayer. Make that there is enough water pressure and that none of the connections are leaking. Use the shut-off button on the T-valve to manage the flow of water to the sprayer and change the water pressure if needed.
Also Read: Innovative Plumbing Solutions: Leading the Way in Sustainable Construction
